Acoustic B410 Specifications download pdf (Page 139)

43984801TX Rev.3

139 /

Oki Data CONFIDENTIAL

Category Item Value Default Function / Notes Valid Save

ESC/P

EMULATION

REDUCTION PRINT NORMAL

A4x2->A4

B4->A4

15INCH->A4

10INCH->A4

* Sets the reduction print size. If a

same size is selected, reduction

print is cancelled.

If selecting 15 inch A4, the print

orientation is landscape, and if

selecting 10 inch A4, the print

orientation is portrait, and it does

not inﬂuence to a setting conﬁgured

in the print orientation of the Print

menu in Page Layout 2. If any size

except A4 is set by a combination

of the tray selection and paper size

selection, all options of this item

can be selected, however, printing

is performed by the same size.

JE

PRINT POSITION 5 MILLIMETER

8.5 MILLIMETER

22 MILLIMETER

*

Sets a vertical print position of the

ﬁrst character in a page by means

of a distance from the paper top

edge to the character top edge.

JE

H OFFSET - 1.0MILLIMETER

~

0.0MILLIMETER

~

+20.0MILLIMETER

*

Corrects the print position

horizontally for the editing direction

in increments of 0.5mm.

Left = Minus

Right = Plus

For the displaying style, refer to

"Int Range sheet".

JE

V OFFSET -15.0MILLIMETER

~

0.0MILLIMETER

~

+15.0MILLIMETER

*

Corrects the print position

vertically for the editing direction in

increments of 0.5mm.

Up = Minus

Down = Plus

If the total setting value of "Print

Position" in the "ESC/P Emulation"

menu and this item is 4.0mm or

less, the internal total shift amount

becomes 4.00mm for operating.

Print start position 8.5mm

Effective value Until -4.50mm

Print start position 22mm

Effective value Until -15.00mm

Print start position 5mm

Effective value Until -1.00mm

For the displaying style, refer to

"Int Range sheet".

JE

RIGHT MARGIN WIDTH

136 COL

* Sets the right margin position that

speciﬁes a limit of one line.

If WIDTH is selected, the printable

area of paper to use is set.

If 136COL is selected, 136

columns (13.6 inch) are printed

regardless of the paper size,

and print data that exceeds the

printable area is cut.

When receiving the right margin

setup command, a setting of the

command has a priority.

JE

CR FUNCTION CR

CR+LF

* Sets an operation when receiving

the CR code.

JE

AUTO LF CR+LF

DISABLE

* Sets an operation at right margin

over.

JE

Table10-1 User Menu (23/33)

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 183 184

Comments to this Manuals

No comments