Acoustic B410 Specifications Page 140

  • Download
  • Add to my manuals
  • Print
  • Page
    / 184
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 139
43984801TX Rev.3
140 /
Oki Data CONFIDENTIAL
Category Item Value Default Function / Notes Valid Save
ESC/P
EMULATION
SELECTIN ENABLE
DISABLE
*
Displayed in the domestic brands.
It is used by ESC/P.
Configure the effective selection
range of SELECT IN signal
for DC1 and DC3 commands.
When ENABLE is selected, if
the SELECT IN signal is high
level when power on, the DC1/
DC3 commands are always be
neglected when the command
is effective and the selection
is ineffective.(The SELECT IN
signal is fixed the LOW level). It is
effective to the ESC/P emulation
even if “SYS CONF MENU” and
“EMULATE” settings are “AUTO”.
ET
AUTOFEED ENABLE
DISABLE
*
Displayed in the domestic brands.
It is used by ESC/P.
Set the signal of AUTO FEED
XT.When ENABLE is selected,if
the AUTO FEED XT signal is low
level when power on, the changing
line operation to the CR code is
done.
When DISABLE is selected,the
changing line operation to the
CR code is not done. (The AUTO
FEED XT signal is fixed the HIGHT
level). It is effective to the ESC/P
emulation even if “SYS CONF
MENU” and “EMULATE” settings
are “AUTO”.
ET
IMAGE REGULAR
PHOTO
* Displayed in the domestic brands.
It is used by ESC/P.
Set the conversion method when
it is converted from 180DPI to
300DPI.
ET
[Conditions for display]
“ENABLE” is selected in “ADMIN
MENU” - “OP MENU” - “ALL
CATEGORY”.
“ENABLE” is selected in “ADMIN
MENU” - “OP MENU” - “PARALLEL
MENU”.
PARALLEL
MENU
PARALLEL ENABLE
DISABLE
* Sets Enable/Disable of Centro I/F.
It is not possible to set up
“DISABLE if “USER MENU - “USB
MENU” - “USB” is “DISABLE”.
However, it is possible to set
all the localport “DISABLE”
when PJL command
“LOCALPORTALLDISABLE” is
setted ENABLE.
PW
BI-DIRECTION ENABLE
DISABLE
* Sets Enable/Disable of bi-
directional Centro.
PW
ECP ENABLE
DISABLE
* Sets Enable/Disable of ECP mode. PW
ACK WIDTH NARROW
MEDIUM
WIDE
* Sets ACK width for compatible
reception.
NARROW = 0.5μs
MEDIUM = 1.0μs
WIDE = 3.0μs
PW
Table10-1 User Menu (24/33)
Page view 139
1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 183 184

Comments to this Manuals

No comments