Acoustic B410 Specifications Page 144

  • Download
  • Add to my manuals
  • Print
  • Page
    / 184
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 143
43984801TX Rev.3
144 /
Oki Data CONFIDENTIAL
Category Item Value Default Function / Notes Valid Save
[Conditions for display]
“ENABLE” is selected in “ADMIN
MENU” - “OP MENU” - “ALL
CATEGORY”.
“ENABLE” is selected in “ADMIN
MENU” - “OP MENU” - “MEMORY
MENU”.
MEMORY
MENU
(Note)
Default is not
displayed. To
display it, setting
to "ENABLE"
for "MEMORY
MENU" in "OP
MENU" of
"ADMIN MENU"
is required.
RECEIVE BUF SIZE AUTO
0.1MB
0.2MB
0.5MB
1MB
2MB
* Sets the size of receive buffer
AUTO: Calculated by the following
formula. The size should be
designated by the value smaller
than the calculation result. The
minimum: 0.1MB
Formula = ((TM-
BM)*0.03+0.5)*const
BM: Base memory size, Min.
component resident memory
size of the series model.(PN286/
7=32MB)
TM: Total memory size, Total RAM
memory.Const=0.25
The maximum selection that Menu
displays is equal to the following
formula or smaller.
Formula=TM*0.08*const
The display of RECEIVE BUF
SIZE is the same as English even
if it set other languages.
RESOURCE SAVE AUTO
OFF
0.1MB
0.2MB
0.5MB
1MB
2MB
*
Sets the size of resource saving
area.
AUTO: Calculated by the following
formula.
This size should be designated
by the value smaller than the
calculation result.
The minimum: 0.1MB
Formula = ((TM-
BM)*0.03+0.5)*const
BM: Base memory size, Min.
component resident memory
size of the series model.(PN286/
7=32MB)
TM: Total memory size, Total RAM
memory.Const=0.25
The maximum selection that Menu
displays is equal to the following
formula or smaller.
Formula=TM*0.08*const
This Menu is displayed only if PS
is installed. This does not appear
in Non-PS models.
FREE MEMORY #####KB Response value is approximate
memory size which is available in
editing received data.
This menu is not displayed in LCD.
Respnse for PJL command.
[Conditions for display]
“ENABLE” is selected in “ADMIN
MENU” - “OP MENU” - “ALL
CATEGORY”.
“ENABLE” is selected in “ADMIN
MENU” - “OP MENU” - “SYS
ADJUST MENU”.
Table10-1 User Menu (28/33)
Page view 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 183 184

Comments to this Manuals

No comments