Acoustic B410 Specifications Page 114
- Page / 184
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
43984801TX Rev.3
114 /
Oki Data CONFIDENTIAL
Note) During the TRAY REQUEST, the results from a forced printing by the Front switch pressed are different from those of HP.
HP may produce a page with the right side left or cut because of left-justifying printing, but the center-justifying printing of this
printer may cut or leave right and left side.
TRAY1
TRAY2
Multipurpose
Tray
(B420)
(B430)
(B440)
MANUAL
(B410)
Executes a paper size check
(checks the convincing paper size
from the paper size detecting
mechanism and actual paper
size), if they are coincident,
determines it as an error.
The editing size should be such
as has been detected.
Executes a paper size check
(checks the convincing paper size
from the paper size detecting
mechanism and actual paper
size), if they are coincident,
determines it as an error.
The editing size should be such
as has been detected.
Paper size check is not
performed. A check is actually
performed in a free size range
(Min.: smallest media - Max.:
largest media).
The edit size is the detected
paper size.
Paper size check is not
performed. A check is actually
performed in a free size range
(Min.: smallest media - Max.:
largest media).
The edit size is the detected
paper size.
Executes a paper size check (checks the
convincing paper size from the paper size
detecting mechanism and actual paper size), if
they are coincident, determines it as an error.
If the EDIT SIZE by the PJL command differs
from that of detection, it will provide a TRAY
REQUEST before the start-up of printing.
The user should replace these papers with the
correct ones.
Executes a paper size check (checks the
convincing paper size from the paper size
detecting mechanism and actual paper size), if
they are coincident, determines it as an error.
If the EDIT SIZE by the PJL command differs
from that of detection, it will provide a TRAY
REQUEST before the start-up of printing.
The user should replace these papers with the
correct ones.
• If the edit size and the paper size in the menu
differ, a paper request will be indicated just
before print start-up. The user should set the
proper size paper.
Paper size check is not performed. A check is
actually performed in a free size range (Min.:
smallest media - Max.: largest media). The edit
size is the edit size selected in the menu.
Executes no paper size
check.
The editing size should
be such as has been
detected.
Executes a paper size
check (checks the
convincing paper size
from the paper size
detecting mechanism
and actual paper size), if
they are coincident,
determines it as an
error.
The editing size should
be such as has been
detected.
Executes no paper size
check.
The editing size should
be such as has been
detected.
Executes a paper size
check (checks the
convincing paper size
from the paper size
detecting mechanism
and actual paper size),
if they are coincident,
determines it as an
error.
If the EDIT SIZE by the
PJL command differs
from that of detection, it
will provide a TRAY
REQUEST before the
start-up of printing.
The user should replace
these papers with the
correct ones.
PAPER SIZE
CHECK
EDIT
SIZE
CASSETTE SIZE
ENABLE
OTHER CASSETTE SIZE
DISABLE
OTHER
TRAY
SELECTION
9. PAPER HANDLING
9.1 Physical Description
9.1.1 Paper feeding input
(1) There are 2 sources for the paper feeding; from paper tray
and multipurpose tray.
(B420/B430/B440)
(2) There are 2 sources for the paper feeding; from paper tray
and manual feeding.
(B410)
9.1.1.1 Standard tray
(1) Paper tray
(a) Paper tray is a universal size
• Since there is no way for the printer to know what size paper is being set in which
tray, paper size must be designated by menu.
(b) Editing Size
1) This equipment sets the size of papers by menu.
2) The printer defaults the size which the PJL command designates as an editing
size, which is determined according to commands from the higher system.
• Editing size check
The relations are shown below of TRAY SELECT, EDIT SIZE, PAPER SIZE and PA-
PER SIZE CHECK.
Editing size check
- B410/B420 1
- B430/B440 1
- Monochrome LED Page Printer 1
- Product specifications 1
- CONTENTS 3
- 1. GENERAL 6
- 1.1 Outline 6
- (Models list) 7
- 1.2 Features 8
- <Top View> 9
- <Side View> 9
- 2. CONFIGURATION 10
- 2.1 Standard Configuration 10
- 2.2 Optional Configuration 10
- 2.3 Consumables 10
- 2.4 Block Diagram 11
- 3. SPECIFICATIONS 12
- 3.1 Printing Specifications 12
- 3.2 Electrical Specifications 13
- 3.3 Physical Specifications 13
- 3.4 Environmental Conditions 14
- (3) Specification 17
- 3.4.12 Printable area 19
- 3.5 Interface Specifications 20
- LVC161284 21
- 6) Timing charts 22
- f) Off-line 23
- g) Paper-End 24
- 7) IEEE1284 24
- 6) List of protocols 27
- (B420/B430/B440) 27
- 12) Setup 33
- 3.6 Safety 34
- 3.7 Toner Specifications 35
- 4. RELIABILITY 36
- 5. MAINTENANCE 37
- 6. OPERATOR PANEL FUNCTION 38
- 6.2 Function of Switches 39
- 6.3 LED Indications 41
- 7. FONTS 53
- 7.1 Fonts (PCL) 53
- 7.2 Rasterizer 53
- 7.3 Resident Fonts 54
- Font Point Pitch Mode 58
- Table 7-5-1 59
- Table 7-5-2 60
- Table 7-5-3 61
- Table 7-5-4 63
- Table 7-5-5 65
- Table 7-5-6 66
- Table 7-5-7-1 67
- Table 7-5-7-2 69
- Euro Currency Font Codes 71
- Symbol Sets and Fonts List 72
- 7.4 Down Line Loading Fonts 77
- • Resident Fonts 78
- 8. SELF DIAGNOSIS FUNCTIONS 82
- 8.1 ROM / RAM Check 82
- 8.2 Test Printing 83
- Oki Data CONFIDENTIAL 100
- 43984801TX Rev.3 113
- 9. PAPER HANDLING 114
- 9.1 Physical Description 114
- 9.2 Logical Method 116
- 10. MENU 117
- 10.1 User Menu 117
- Table10-1 User Menu (2/33) 118
- Table10-1 User Menu (3/33) 119
- Table10-1 User Menu (4/33) 120
- Table10-1 User Menu (5/33) 121
- Table10-1 User Menu (9/33) 125
- Table10-1 User Menu (10/33) 126
- Table10-1 User Menu (11/33) 127
- Table10-1 User Menu (12/33) 128
- Table10-1 User Menu (13/33) 129
- Table10-1 User Menu (14/33) 130
- Table10-1 User Menu (15/33) 131
- Table10-1 User Menu (16/33) 132
- Table10-1 User Menu (17/33) 133
- Table10-1 User Menu (18/33) 134
- Table10-1 User Menu (19/33) 135
- Table10-1 User Menu (20/33) 136
- Table10-1 User Menu (21/33) 137
- Table10-1 User Menu (22/33) 138
- Table10-1 User Menu (23/33) 139
- Table10-1 User Menu (24/33) 140
- *(PN286) 141
- *(PN287) 141
- Table10-1 User Menu (26/33) 142
- Table10-1 User Menu (27/33) 143
- Table10-1 User Menu (28/33) 144
- Table10-1 User Menu (29/33) 145
- Table10-1 User Menu (30/33) 146
- Table10-1 User Menu (31/33) 147
- Table10-1 User Menu (32/33) 148
- Table10-1 User Menu (33/33) 149
- 10.2 Admin Menu 150
- Table10-2 Admin Menu(2/5) 151
- Table10-2 Admin Menu(3/5) 152
- Table10-2 Admin Menu(4/5) 153
- Table10-2 Admin Menu(5/5) 154
- 10.3 Factory Default 155
- 11.1 Local Print 159
- 11.2 Cleaning Print 160
- 11.3 Font Print 160
- 12. SPECIAL MAINTENANCE 161
- 12.1 User Maintenance Mode 161
- 13.1 HP PCL5e Control Codes 165
- 13.2 HP GL/2 Commands 168
- 13.3 PCLXL Commands 170
- 13.4 PJL Commands 173
- 13.5 SIDM Commands Summary 174
- 13.6.4 Status Messages 179
- 14. PROGRAMMING HINTS 181
- 15. SOFTWARE SPECIFICATIONS 182
- 15.1 Supported OS 182
- Modules OS 183
- Comments 183
- 184 / 184 184
© 2020, manymanuals.com. All rights reserved. | 1.315 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals